« 大型倒産速報 | 帝国データバンク[TDB] | トップページ | 寿一待ち »

2009年9月 2日 (水)

nissan data scanが更新されていた

nissan data scanが更新されていて今までのがnissan data scan I

The Nissan DataScan I is intended for Nissan cars build between years 1989 and 2000. Majority of these cars are equipped with grey 14 pin Consult I connecter. The connector is usually located near the fuse box.

A list of cars that the software has been tested on is located on the Supported Vehicles page. The list is by no means comprehensive and is constantly being updated as new vehicles are tested. If your car is not on the list but has the above mentioned connector chances are the software will work just fine. If you are unsure you can always download the Nissan DataScan I software and test the connection to your car before registering the software. The unregistered software is limited to monitoring 2 engine parameters at the time via the Dashboard function.

The Nissan DataScan I software supports factory Nissan engine ECUs. Aftermarket ECUs like Apexi Power FC or F-Con V Pro are not compatible with the software.

A support for a wide band Lambda controller from www.TechEdge.com.au has also been added in the latest release. Readings from the controller can be incorporated with the data logs for the ultimate performance and tuning data logging.

新たにNissan DataScan I Dashが追加
The Nissan DataScan I Dash software is intended for Nissan Consult I protocol compliant cars with primary focus on car PC users. This software does not have any of the advance functionality found in the Nissan DataScan I software. It's primary function is to display data received from standard Nissan ECU. The data is collected via Consult I connector (DDL).

Majority of Nissan cars build between years 1989 and 2000 are equipped with a grey 14 pin Consult I connecter. The connector is usually located near the fuse box.

This software is compatible with the same cars as Nissan DataScan I software. A list of cars that the software has been tested on is located on the Supported Vehicles page. The list is by no means comprehensive and is constantly being updated as new vehicles are tested. If your car is not on the list but has the above mentioned connector chances are the software will work just fine.

If you are unsure you can always download the Nissan DataScan I software and test the connection to your car. The unregistered software is limited to monitoring 2 engine parameters at the time via the Dashboard function.

The Nissan DataScan I Dash software supports factory Nissan engine ECUs. Aftermarket ECUs like Apexi Power FC or F-Con V Pro are not compatible with the software.

さらにOBD-IIに対応したNissan DataScan II
The Nissan DataScan II is intended for newer Nissan cars equipped with grey 16 pin OBDII connecter. The connector is usually located near the fuse box.

A list of cars that the software has been tested on is located on the Supported Vehicles page. The list is by no means comprehensive and is constantly being updated as new vehicles are tested.

This is a new product under continuous development. Additional functions are being tested and will be implemented with future software releases. Software upgrades are free for registered users.

The Nissan DataScan II software supports factory Nissan ECUs. Aftermarket ECUs like Apexi Power FC or F-Con V Pro are not compatible with the software.

忙しくて確認している暇がとれないけど、Nissan DataScan IIはリプロ(ROMの書き換え)には対応していないのが残念。
それとPower-FCとF-Con Vなんて記載があってオッと思ったらアフターマーケットのECUは対応していないよとの注意書きだった。Power-FCもF-Con Vも純正ECUとは通信が違うから当たり前なんだけどね。

« 大型倒産速報 | 帝国データバンク[TDB] | トップページ | 寿一待ち »

」カテゴリの記事

コメント

コメントを書く

(ウェブ上には掲載しません)

トラックバック

この記事のトラックバックURL:
http://app.cocolog-nifty.com/t/trackback/162554/46093857

この記事へのトラックバック一覧です: nissan data scanが更新されていた:

« 大型倒産速報 | 帝国データバンク[TDB] | トップページ | 寿一待ち »

サイト内検索
ココログ最強検索 by 暴想
2017年3月
      1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31  

最近のトラックバック

無料ブログはココログ